| Type: | Conditioner |
|---|---|
| Usage: | Environmental Protection |
| Style: | Tube |
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier Under the influence of pressure,The liquid into the interior of the filter, Impurities are trapped on the filter element, The filtrate flows through the filter core to achieved the purpose of filtration.
This generally occurs after multi-media pretreatment filtration, before reverse osmosis, ultrafiltration, etc. membrane filtration equipment. It is used to filter out fine substances (such as tiny quartz sand, activated carbon particles, etc.), bacteria and other impurities filtered by the multi-media.
The working principle is Mechanical filtration using different precision pores of the filter element. all contaminants can be trapped in the filter cartridges surface and in the pores because of the flow direction.
As the filtration time increases, the filter element is contaminated by impurities.The running resistance increases, and when the operating pressure difference between the inlet and outlet water reaches 0.1 MPA, the filter element should be replaced.
| Working pressure: | 0.6 / 1.0 / 1.6Mpa |
| Body Material: | Stainless steel (SUS304, SUS304L, SUS316, SUS316L). |
| Operating temperature: | 5 ~ 40 ºC (exceed 60 ºC to be informed) |
| Design temperature: | 5 ºC -100 ºC |
| Replace the pressure: | 0.05Mpa-0.07MPA |
| Filter interface: | flat compression, plug-in |
| Cylinder and base connection mode: | quick opening, flanged |
| Seal type: | O-ring or flat washer |
| Seal Material: | PTFE, rubber. |
| Sealing material: | nitrile rubber, silicone, Viton, standard configuration for the silicone seal. |
| Flange Standard: | GB, HG, SH, HGJ, JB, ANSL, JIS and other standards. (User-specified, please indicate the pressure level) |
| Manufacturing, testing standard: | GB150 standard, or user-specified criteria. |
Q:What is your OEM & ODM process ?
A:1.Customer request
2.Factory propose solutions
3.Customer confirms solutions
4.Factory offers quotation
5.Customer confirms quotation
6.Sample for testing
7.Sample quality approved
8.Customer places bulk order
9.Bulk order production and shipment
10.Repeat orders
Q:What is your production lead time?
A::Usually about 15-18 days, but we might finish the production earlier if there are not too many orders.
Q:How much discount can l get?
A:Larger quantity,more discount.But when bulk order,we can return the sample product cost to you for free.
Q:Can I have my logo on the product?
A:Customer's logo can be embossed on our case.But you need to send us the logo in Al or CDR or PSD format. We will ask our designer to make a drawing for you to have a check how it looks on our case.
Q:How long can l get the sample?
A:For samples, it usually takes 2-3 days.
Q:What is your MoQ?
A:MOQ is 1x20GP container, please contact us to ask if your order quantity is less than our MOQ.
Q:What is your best price?
A:Our products have a quite wide price range for different types. Thus please contact us online, we will glad to give you quotation upon receipt of your detailed requirements.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}